- the universal comfort interface is a KNX component for installation in commercially available 60 mm flush-mount distribution boxes or for installation in devices or boxes - represents an interface
for possible free contacts
- the universal comfort interface recognizes changes in the respective switching status inputs and sends telegrams to the bus according to the parameterized application
- depending on the loaded application, you can work all channels as inputs or outputs or as a combination of these two (4 inputs/4 outputs)
- The universal interface button can also control up to 8 LEDs or the up to 8 potential-free buttons via its inputs and send the corresponding telegrams to the busbar
- It is not allowed to connect 230 V signals to the inputs
- The following app settings are available to you
Universal Interface Convenience: Buttons, Toggle, Toggle Mode Toggle, Dimming (Single and Two Surface Operation), Shade Control, Toggle & Dim, Shade Toggle & Control, Cyclic Drive, 2 Levels of Operation (Buttons Only) ), switching , dimming and blind control, light dinner call, board, value transmitter, forced operation - object for audio/video control - cyclic transmission start too
possible
via switch object
- transmitter dimming/position value 1 byte
- short circuit and overload test (electronic fuse)
- protected against reverse polarity
- how do you end parafuso
- Outputs for LEDs, eg. B. as status LED
- with programming button and green programming LED
- contacts of temperature detectors or controllers, for communication on the KNX bus system
Applications:
- 8 entries
- 8 outputs (LED, max. 0.8 mA per output)
- 4 inputs/4 outputs
Technical dice:
Black
Operating voltage via busbar: 21 to 32 V DC
Cable input voltage per channel: 20 V
Operating temperature: -5 to 45 degrees Celsius
Input current per channel: max. 0.8mA
Layer compartment: max. 10m
Dimensions (WxHxD): 48.1 x 44.2 x 31.8 mm
