Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Aeotec’s Z-Wave Plus repeater and range extender.

Aeotec’s new repeater and range extender.

Z-Wave makes your home smarter. The Aeotec Doorbell 6 also makes your entrance area smarter. By combining visual (1000lm) and audible (110dB) alarms, you'll be notified when someone is at your door. You can also connect the Aeotec Doorbell 6 to automated scenes and, for example, turn on the lights in the hallway when it is dark. Why don't you use your Doorbell as a siren? Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. In combination with various sensors, you are fully protected. By the way you can also use the Aeotec Doorbell 6 without Z-Wave.

Save up to 30% energy costs by upgrading your Smart Home with the Aeotec Radiator Thermostat.

A smart heating control system is comfortable, flexible and efficient at the same time. Due to intelligent automation, you can use the thermostat to set any room in your house to your preferred temperature.

Change the temperature, anytime and anywhere. Thanks to wireless Z-Wave connection and FLiRS technology the Radiator Thermostat reacts immediately to any temperature setting which is sent from your Smart Home Gateway. The illuminated LED screen and buttons also allow you to control your desired temperature manually.

No wiring or special tools are required to install the Aeotec Radiator Thermostat. The thermostat fits all M30 x 1.5mm radiator valves. Various adapters for RAV, RAL and RAVL valves are included.

With the Aeotec NanoMote you control devices and scenes in your intelligent home easily and intuitively - on the wall and in your hand - with one or four buttons.

The NanoMote Quad from Aeotec is a stationary 4-button wall switch as well as a portable remote control, which can be integrated into an existing Z-Wave network as a secondary controller for wireless control of devices and scenes.

The Aeotec NanoMote sends commands to the Z-Wave gateway and controls electronic devices, shutters and blinds or lamps. The Aeotec NanoMote Quad controls up to 15 automated scenes.


The battery-operated device can be wall mounted or used as a portable remote control. It can also be used as a pendant on your key ring or car key. In order to avoid unintentional triggering, the Aeotec NanoMote has a locking function which is triggered by a predefined combination of keystrokes.

The Aeotec Siren 6 makes your home smarter and safer. The Aeotec Siren 6 enriches your Smart Home with a further safety factor. In combination with other Z-Wave devices, the visually appealing alarm siren warns of various situations with acoustic (110db) and visual signals. Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. You can also use the siren as a doorbell in addition to the alarm functions. The Aeotec Siren 6 plays 30 different tones, which are defined via parameters in the gateway. In summary, this device works particularly well for any type of acoustic and visual alarm in your Smart Home. The power supply of the Aeotec Siren 6 works easily via a power socket or battery operated. Due to its high-quality design, the siren fits well into your rooms and is hardly noticed.

The SmartThings Hub V3 is the central connection and acts like the intelligent brain of your modern Smart Home. It allows you to connect wirelessly to a wide range of smart devices.
The associated SmartThings App on your Smartphone becomes the basic control center. The hub connects to your router via Wi-Fi or the included LAN cable and is ready to go in no time.

Note from Smarthings and Aeotec/Z-Wave Europe:
"The former Samsung SmartThings Hub has only changed its name. Technically it is the same product.
There is just a change in branding of this product. Now it is called “Aeotec Smart Home Hub - Works as a SmartThings Hub”.

Based on a worldwide agreement between Samsung and Z-Wave Europe, Z-Wave Europe GmbH is the SmartThings sales channel for the “Works with SmartThings Hub” and other SmartThings components.
Therefore, Samsung points customers and prospects to Z-Wave Europe, when they ask for the SmartThings Hub. Of course the user has access to the very large Smart Home Ecosystem, which is based on the SmartThings App."