Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Philio

    Flood Multisensor 3 in 1

    €47.97 excl tax
    Zipato Flood Multisensor 3 in 1 integrates flood, temperature and humidity sensors in one device. Zipato Flood Multisensor 3 in 1 offers elaborate security and ambient sensing options. Multifunctional nature of this product allows you to informed about water leakages and potential flood disasters, as well as to measure temperature and humidity levels. When used with Zipato home automation controllers it can be part of any automation scenario created using Zipato Rule Creator. Accordingly it can be used to automatically trigger other Z-Wave devices when activated.
    SKU: ph-pat02.eu

    Features:

    • Zipato Flood Multisensor 3 in 1 integrates flood, temperature and humidity sensors in one device;
    • New Z-Wave 500 series chip supports multichannel operation and higher data rates (9.6/40/100kbps);
    • Can be used with various Z-Wave networks/controllers, regardless of the manufacturers;
    • High sensitive linear flood detector;
    • Mounting can be done with tape or screws (included in the box);
    • Extremely low power power consumption, 7 years battery lifespan;
    • Over-the-air firmware update;
    • Easy installation.



    TechInfo:

    • PROTOCOL: Z-Wave Plus;
    • OPERATING VOLTAGE: 3V CR123A lithium battery, 1400mAh;
    • OPERATING TEMPERATURE: -10°C ~ 40°C;
    • TEMPERATURE DETECTION RANGE: 0°C ~ 40°C;
    • TEMPERATURE DETECTION ACCURACY: +/- 0,4°C (max);
    • HUMIDITY DETECT RANGE: 80%RH;
    • RANGE: Minimum 30 meters indoor / 70 meters outdoor;
    • DIMENSIONS: 22 x 27 x 83 mm;
    • WEIGHT: 55g;
    • REGULATION: EMC 2004/108/EC, R&TTE 1995/5/EC, LVD 2006/95/EC, FCC Part 15;









    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features:

    • Zipato Flood Multisensor 3 in 1 integrates flood, temperature and humidity sensors in one device;
    • New Z-Wave 500 series chip supports multichannel operation and higher data rates (9.6/40/100kbps);
    • Can be used with various Z-Wave networks/controllers, regardless of the manufacturers;
    • High sensitive linear flood detector;
    • Mounting can be done with tape or screws (included in the box);
    • Extremely low power power consumption, 7 years battery lifespan;
    • Over-the-air firmware update;
    • Easy installation.



    TechInfo:

    • PROTOCOL: Z-Wave Plus;
    • OPERATING VOLTAGE: 3V CR123A lithium battery, 1400mAh;
    • OPERATING TEMPERATURE: -10°C ~ 40°C;
    • TEMPERATURE DETECTION RANGE: 0°C ~ 40°C;
    • TEMPERATURE DETECTION ACCURACY: +/- 0,4°C (max);
    • HUMIDITY DETECT RANGE: 80%RH;
    • RANGE: Minimum 30 meters indoor / 70 meters outdoor;
    • DIMENSIONS: 22 x 27 x 83 mm;
    • WEIGHT: 55g;
    • REGULATION: EMC 2004/108/EC, R&TTE 1995/5/EC, LVD 2006/95/EC, FCC Part 15;