Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: X10

    Outdoor Appliance Module (Type G - Shuco)

    €13.00 excl tax

    The AM19RF ON/OFF Indoor Appliance module from Haibrain® enables you to remotely and wirelessly control your lights and appliances with X10 RF.

    The Indoor Appliance module is an X10 RF receiver and is able to receive commands from all RF Transmitters, such as the MS13, SS11 and all other X10 RF controls. The AM19RF converts an incoming RF signal into a direct command (ON/OFF) to your connected light or device.

    The AM19RF RF receiver has the same features as the AM17RF. However, the AM19RF is suitable for outdoor use, the lid protects the socket against splash water (IP44). To guarantee that the appliance module is waterproof, we recommended placing the module into a vertically oriented outlet with the hinged lid on top and use an insulated grounding type plug. Secondly make sure the lid is closed when no devices are connected.

    SKU: AM19RF-G

    Features:

    To install, simply place the module between your socket and light/device. Press the ‘learn key’ until the LED starts flashing, the AM19RF is ready now to learn it’s X10 address. With any X10 RF device send the desired House/Unit code command two times, until the LED stops flashing. From now on, you will be able to control your connected light/device remotely!

    AM19RF.jpgApplication:

    The AM19RF is available with a plug type type F (Belgium/France).

    TechInfo:

    • Power Suplly: 230V +/- 10 %, 50 Hz;
    • Electricity consumption: < 0,5W;
    • Power: 2.000W (lamps and halogen lights), 230W (motors), 3.000W (resistive load);
    • Frequency: 433.92 Mhz;
    • Responds to codes X10 RF: All units ON and OFF;
    • IP rating: IP44;
    • Temperature: -10°C to 50°C (operation), -20°C to70°C (storage);
    • Dimensions: 115 x 55 x 70 mm.









    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features:

    To install, simply place the module between your socket and light/device. Press the ‘learn key’ until the LED starts flashing, the AM19RF is ready now to learn it’s X10 address. With any X10 RF device send the desired House/Unit code command two times, until the LED stops flashing. From now on, you will be able to control your connected light/device remotely!

    AM19RF.jpgApplication:

    The AM19RF is available with a plug type type F (Belgium/France).

    TechInfo:

    • Power Suplly: 230V +/- 10 %, 50 Hz;
    • Electricity consumption: < 0,5W;
    • Power: 2.000W (lamps and halogen lights), 230W (motors), 3.000W (resistive load);
    • Frequency: 433.92 Mhz;
    • Responds to codes X10 RF: All units ON and OFF;
    • IP rating: IP44;
    • Temperature: -10°C to 50°C (operation), -20°C to70°C (storage);
    • Dimensions: 115 x 55 x 70 mm.