Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Philio

    Relay Insert 2 * 1.5 KW with energy metering

    €48.70 excl tax
    This in-wall dual relay switch module is a transceiver which is a Z-Wave Plus enabled device and is fully compatible with any Z-Wave enabled network.Mini size design let the module can easily hide itself into the wall box and that will be good for the house decoration. There are many kind of application by using the module to switch AC power On and Off, one main application is the light control. The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of light like incandescent, fluorescent and LED light.This in-wall switch module is able to detect Instant power wattage and overload current (7.5A) of connected light or appliances. When detecting overload state, the Module will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, disconnect and re-connect the Module will reset its overload condition to normal status.
    SKU: ZWPHI PAN04
    Availability: In stock

    Features:

    • World first two relay Z-wave 400 series module;
    • Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps);
    • Higher RF output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range;
    • Very low electricity consumption, meet Europe year 2012 energy-related products requirement directive 2009/125/EC no. 1275/2008.



    TechInfo:

    • Input voltage: AC 90~240V, DC 24~60V;
    • Load: resistive 2x1.500W @230V, 2x800W @120V;
    • Output type: dry contact relay
    • Power consumption: 0,48W@230V, 0,35W@120V (standby)
    • Frequency: 868.42 MHZ (EU);
    • Range: 40m indoor, 100m outdoor;
    • Operation Temperature: 0~40°C;
    • Humidity: 85%RH max;
    • Weight 30g;
    • Dimension (WxHxD): 47,5x39x15,6 mm.









    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features:

    • World first two relay Z-wave 400 series module;
    • Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps);
    • Higher RF output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range;
    • Very low electricity consumption, meet Europe year 2012 energy-related products requirement directive 2009/125/EC no. 1275/2008.



    TechInfo:

    • Input voltage: AC 90~240V, DC 24~60V;
    • Load: resistive 2x1.500W @230V, 2x800W @120V;
    • Output type: dry contact relay
    • Power consumption: 0,48W@230V, 0,35W@120V (standby)
    • Frequency: 868.42 MHZ (EU);
    • Range: 40m indoor, 100m outdoor;
    • Operation Temperature: 0~40°C;
    • Humidity: 85%RH max;
    • Weight 30g;
    • Dimension (WxHxD): 47,5x39x15,6 mm.









    Customers who bought this item also bought

    Z-Wave Plus Relay Insert Blind

    €48.70 excl tax
    The Philio Roller Shutter Controller insert allows controlling motors for jalousies and blinds both via Z-Wave wirelessly and locally utilizing a traditional wall switch.
    The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load.
    This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
    The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.

    FIBARO Smart Implant

    €36.57 excl tax
    This small device allows you to control the door of your garage or heating system, as a smart complement to your alarm system or simply to make all devices smart in your home. As an additional development of the Universal binary Sensor, the FIBARO Smart Implant controls the connected device, can be used for scene control, has a temperature sensor and is compatible with binary sensors. In addition to controlling the devices (ON / OFF), the device reads the sensor data and amplifies the existing Z-Wave network.

    Relay Insert 2 * 1.5 KW

    €43.35 excl tax
    The Philio Insert Switch allows controlling two independent loads both wirelessly via Z-Wave and locally utilizing a traditional wall switch. Thanks to its calibration technology the PAN06 cannot only be used to switch AC devices ON and OFF, it also works perfectly with many kind of light, e.g. incandescent, fluorescent and LEDs.
    In addition to this, the PAN06 can be connected to 12V/DC, which makes it possible to switch 12V MR-16 light as well.
    The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the insert that is controlling the load.
    This device is designed for a 3 wire system and needs a neutral wire in the wall box.

    Z-Wave controlled Radiator Thermostat - Danfoss Living Connect LC-13

    €32.51 excl tax €56.90 excl tax

    Living connect® LC-13 is a Z-Wave controlled electronic radiator thermostat with a new firmware. It is controlled by either a Z-Wave compatible Controller or a central device called Danfoss LinkTM CC. The Danfoss LinkTM CC can also control hydronic and electrical floor heating and on/off switches in a building. living connect® uses Z-Wave wireless communication technology, is easy to install and is supplied with adapters for all thermostatic valves manufactured by Danfoss and most other radiator valve manufacturers.

    Living connect® is battery powered, compact and very easy to operate with only three buttons on the front.

    Additionally the temperature can be set wirelessly to a certain set point. The device has a scheduler inside that allows to set up to 9 different set point for each day of a 7 day week. This means that energy saving is even achieved when the controlling device is offline or not working. Local buttons can always overwrite the scheduled setting. living connect® features an open-window function, which closes the valve if the temperature in the room is falling dramatically.

    Relay Insert 2 * 1.5 KW Z-Wave Plus

    €48.77 excl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.