Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    Fibaro Smart Module

    €48.77 excl tax
    The remotely operated FIBARO Smart Module and Double Smart Module are designed to turn electrical devices or circuits on and off.
    Smart Module (FGS-214) allows to control one device or circuit and the Double Smart Module (FGS-224) allows to control two devices or circuits.
    The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.
    SKU: ZWFIB FGS-214
    Availability: In stock
    • Works with various types of switches and buttons.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

    The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

    Specifications

    Power supply 100-240V~ 50/60Hz or 24-30V DC
    Rated load current Smart Module (FGS-214):
    6.5A
    Double Smart Module (FGS-224):
    6A per one channel
    9.5A total
    Compatible load types resistive or incandescent only
    Active element micro-gap relay μ
    Maximum length of wires 3 meters
    Recommended wire cross-section area 0.2–2.0mm2 (24–14 AWG)
    (depending on load current)
    Operating temperature 0–35°C
    Ambient humidity 0–95% RH without condensation
    Radio protocol Z-Wave (500 series chip)
    Radio frequency band 868.0–868.6MHz; 869.7–870.0MHz
    Max. transmitting power +5dBm
    Range up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure
    Dimensions
    (Height x Width x Depth)
    42.5 x 38.25 x 20.3 mm
    Classification of installation and use Automatic electrical control for use in equipment for household or similar use
    Mode of operation Type 1.C Action
    Pollution degree 2
    Software class Class A
    Protection against electric shock class Class 0
    Compliance with EU directives 2011/65/EU
    2015/863
    2014/53/EU
    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent
    • Works with various types of switches and buttons.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

    The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

    Specifications

    Power supply 100-240V~ 50/60Hz or 24-30V DC
    Rated load current Smart Module (FGS-214):
    6.5A
    Double Smart Module (FGS-224):
    6A per one channel
    9.5A total
    Compatible load types resistive or incandescent only
    Active element micro-gap relay μ
    Maximum length of wires 3 meters
    Recommended wire cross-section area 0.2–2.0mm2 (24–14 AWG)
    (depending on load current)
    Operating temperature 0–35°C
    Ambient humidity 0–95% RH without condensation
    Radio protocol Z-Wave (500 series chip)
    Radio frequency band 868.0–868.6MHz; 869.7–870.0MHz
    Max. transmitting power +5dBm
    Range up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure
    Dimensions
    (Height x Width x Depth)
    42.5 x 38.25 x 20.3 mm
    Classification of installation and use Automatic electrical control for use in equipment for household or similar use
    Mode of operation Type 1.C Action
    Pollution degree 2
    Software class Class A
    Protection against electric shock class Class 0
    Compliance with EU directives 2011/65/EU
    2015/863
    2014/53/EU
    Customers who bought this item also bought

    Roller shutter 3

    €48.77 excl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.

    Fibaro Double Smart Module

    €48.77 excl tax
    The remotely operated FIBARO Double Smart Module is designed to turn electrical devices or circuits on and off.
    The Double Smart Module (FGS-224) allows to control two devices or circuits.
    The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.

    Kit SecuPlace WiFi+2G

    €350.00 excl tax
    Kit Secuplace WiFi+2G includes:
    • 1x SecuPlace - Commpact WiFi + 2G GPRS
    • 2x Wireless 1 & 2 Way PIR/PET (Ref. EL-5845PI)
    • 1x Wireless 1-Way Magnetic Contact (Ref. EL-2801DZ)
    • 1x Wireless Multifunction Keyfob (Ref. EL-2714)
    The SecuPlace intrusion system is named for its streamlined, space-saving design, while offering a professional, highly reliable system at a competitive price.

    Its connectivity to the cloud-based ELAS server enables it to be controlled remotely by EL’s smartphone app (also available via web browser) that enables users to arm/disarm the system remotely as well as receive email/ SMS/ voice notifications and view and store a history of events.

    SecuPlace supports a wide range of security and safety accessories including elderly care and detectors against smoke, flood and poisonous gases.

    The simple and quick wireless installation and remote programming of the SecuPlace system add further to its appeal as a powerful, convenient system which allows users to enjoy a complete sense of control as well as peace of mind.

    The SecuPlace system is also compatible with our full range of 1-way accessories for safety & detection.



    The EL Wireless 1 & 2 Way PIR /PET detector protects both iConnectTM and CommPactTM systems with advanced Passive Infrared (PIR) intrusion-detection capabilities by sensing motion in the protected zone – even in total darkness. Offering a choice of selectable 1-way or 2-way RF communication, the PIR is powered by two long-life Lithium batteries and includes a "sleep" feature that ignores events during disarming – for battery power-conservation, and for user privacy. A pet-friendly design enables a pet (up to 45 kg. / 99 lbs.) to roam freely without triggering an alarm. Easy to install, a built-in bracket enables either wall or corner mounting for optimal detection coverage.

    Compatible for systems utilizing the SecuPlaceTM control panel, the EL Wireless 1-Way Magnetic Contact delivers state-of-the-art intrusion detection for doors and windows, plus a non-intrusive, contemporary look. The detector is easily mounted using either screws or adhesive strips (included).

    The Wireless Round Multi-Function Keyfob is an EL’s newly designed miniature keyfob that can easily fit onto a keychain for fashionable convenience and control. The wireless device uses a single off-the-shelf battery, with efficient power use for longer battery life. It's a four-button keyfob with five functions: Full, Part & Perimeter Arm, Disarm, Home Automation On/Off, Panic Alarm Generation. It has LED transmission indication and also flashes to indicate low battery. Includes status indication.

    Relay Insert 2 * 1.5 KW Z-Wave Plus

    €48.77 excl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Dimmer 2 - 250W Universal Insert Module

    €48.77 excl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).