Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    FIBARO The Button Homekit

    €48.77 excl tax
    €39.02 excl tax
    FIBARO Button is a HomeKit-enabled, compact, battery-powered wireless controller using Bluetooth® low energy technology.
    It allows you to control HomeKit accessories using Automations.
    Various actions may be triggered with one clicks, two clicks or by holding the button down.
    With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
    SKU: FGBHPB-101
    Availability: 4 in stock

    Features: The Button detects if it was clicked one time, two time or held, then reports it to your iOS device.
    Automations can be created based on the detected action.
    The Button measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.
    The Button is equipped with a built-in buzzer that signals status of the accessory, like identification (3 triple beeps) or reset confirmation (long beep). If enabled, the accessory can also respond to actions with sound signals. The accessory will confirm number of performed clicks with the same amount of beeps (e.g. two clicks - two beeps). Holding will be signaled with intermittent tone.


    TechInfo: Power supply: 3.6V DC battery
    Battery type: ER14250 ½AA
    Battery life: est. 2 years (max. 10 pushes per day)
    EU standards compliance: RED 2014/53/EU
    RoHS 2011/65/EU
    Radio protocol: Bluetooth® low energy
    Radio frequency: 2.4 GHz
    Range: up to 50m (free range) (164 feet)
    Operating temperature: 0-40°C (32-104°F)
    Dimensions (diameter x height): 46 x 34 mm (1.81" x 1.34")
    Warning: Using batteries other than specified may result in explosion. Dispose of properly, observing environmental protection rules.





    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features: The Button detects if it was clicked one time, two time or held, then reports it to your iOS device.
    Automations can be created based on the detected action.
    The Button measures battery level every 24 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device.
    The Button is equipped with a built-in buzzer that signals status of the accessory, like identification (3 triple beeps) or reset confirmation (long beep). If enabled, the accessory can also respond to actions with sound signals. The accessory will confirm number of performed clicks with the same amount of beeps (e.g. two clicks - two beeps). Holding will be signaled with intermittent tone.


    TechInfo: Power supply: 3.6V DC battery
    Battery type: ER14250 ½AA
    Battery life: est. 2 years (max. 10 pushes per day)
    EU standards compliance: RED 2014/53/EU
    RoHS 2011/65/EU
    Radio protocol: Bluetooth® low energy
    Radio frequency: 2.4 GHz
    Range: up to 50m (free range) (164 feet)
    Operating temperature: 0-40°C (32-104°F)
    Dimensions (diameter x height): 46 x 34 mm (1.81" x 1.34")
    Warning: Using batteries other than specified may result in explosion. Dispose of properly, observing environmental protection rules.





    Customers who bought this item also bought

    Relay Switch HomeKit

    €40.32 excl tax
    FIBARO Single Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Single Switch allows to control connected devices either via HomeKit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Flood Sensor HomeKit

    €46.82 excl tax
    FIBARO Flood Sensor is a HomeKit-enabled water detector using Bluetooth® low energy wireless technology. The accessory alarms about flooding, whenever water is detected between its probes. Along with detecting flooding, the accessory measures the ambient temperature. Tampering is detected whenever the accessory is moved or casing is opened.

    Danalock V3 (silver), Bluetooth Apple HomeKit compatible

    €130.00 excl tax €161.79 excl tax
    The danalock V3 evolution is based on the feedback from devoted customers and the latest development in data security and smart home technology.
    Smaller, stronger and easier to install the V3 takes the lead on the smartlock market and is setting new standards for years to come.

  • Setting New Standards:
    Twice the power;
    Four times faster;
    Smarter, smaller and safer;
    Auto calibration procedure;
    Lock Status;
  • Motion sensor HomeKit

    €45.52 excl tax
    FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy wireless technology. Along with detecting motion, the accessory measures temperature and light intensity. Built-in accelerometer detects tampering with the accessory. Every time the movement is detected, Motion Sensor will glow in different colour depending on the temperature.

    Modular retrofit door cylinder for Danalock door lock

    €47.97 excl tax
    This door cylinder (26 mm inward) can be put together in a modular way to the according length enabling the assembly of the electric door lock Danalock (oval, square, V125 or V3).
    Scope of delivery contains all needed modules for the following lengths:
    - 35mm (Base without module)
    - 42mm
    - 45mm
    - 50mm

    The profile cylinder package also contains keys as well as all needed screws for assembly.