Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    Relay Insert 1 channel Switch2 Z-Wave Plus

    €59.99 incl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    SKU: ZWFIB FGS-213

    Features:

    • Compatible with any Z-Wave or Z-Wave+ Controller;
    • Supports protected mode (Z-Wave network security mode) with AES-128 encryption;
    • Advanced microprocessor control;
    • Active power and energy metering functionality;
    • Works with various types of switches – momentary, toggle, three-way, etc;
    • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations;
    • Built-in scene activation mechanism;
    • Configuration menu with a diode;
    • 1 to 3 presses and holding the key pressed down can be mapped to four different actions;
    • Very accurate energy measurement +/- 1 % for power above 5W;
    • Z-Wave network coverage tester;
    • Allows software updates;
    • Recommended to control resistive and incandescent loads;



    TechInfo:

    • Power supply: 100-240V~ 50/60 Hz;
    • Rated Current (IEC standards): 8A (resistive loads) ;
    • Operating temperature: 0-35°C;
    • Overcurrent protection: required external 10A circuit breaker;
    • Radio protocol: Z-Wave (500 series chip);
    • Radio signal power: up to 1mW;
    • Radio frequency: 868.4 or 869.8 MHz EU;
    • Range: up to 50m outdoors, up to 40m indoors;
    • Comply with EU directives: EMC 2014/30/EU, R&TTE 1999/5/EC, RoHS 2011/65/EU, LVD 2014/35/EU;
    • Dimensions (L x W x H): 2.5 x 38.25 x 20.3 mm;









    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features:

    • Compatible with any Z-Wave or Z-Wave+ Controller;
    • Supports protected mode (Z-Wave network security mode) with AES-128 encryption;
    • Advanced microprocessor control;
    • Active power and energy metering functionality;
    • Works with various types of switches – momentary, toggle, three-way, etc;
    • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations;
    • Built-in scene activation mechanism;
    • Configuration menu with a diode;
    • 1 to 3 presses and holding the key pressed down can be mapped to four different actions;
    • Very accurate energy measurement +/- 1 % for power above 5W;
    • Z-Wave network coverage tester;
    • Allows software updates;
    • Recommended to control resistive and incandescent loads;



    TechInfo:

    • Power supply: 100-240V~ 50/60 Hz;
    • Rated Current (IEC standards): 8A (resistive loads) ;
    • Operating temperature: 0-35°C;
    • Overcurrent protection: required external 10A circuit breaker;
    • Radio protocol: Z-Wave (500 series chip);
    • Radio signal power: up to 1mW;
    • Radio frequency: 868.4 or 869.8 MHz EU;
    • Range: up to 50m outdoors, up to 40m indoors;
    • Comply with EU directives: EMC 2014/30/EU, R&TTE 1999/5/EC, RoHS 2011/65/EU, LVD 2014/35/EU;
    • Dimensions (L x W x H): 2.5 x 38.25 x 20.3 mm;









    PRICE BREAKS - The more you buy, the more you save
    Quantity
    5+
    Price
    €49.99
    Customers who bought this item also bought

    Dimmer 2 - 250W Universal Insert Module

    From €49.99 incl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

    Relay Insert 2 * 1.5 KW Z-Wave Plus

    From €49.99 incl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Z-Wave Wall Plug w/ metering - F plug (Shucko)

    €64.99 incl tax
    Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
    Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.

    Need price for quantities? Please contact us!
    Chat tool;
    Contact form;
    Phone: +351 223 744 938 ;
    email: info@eurox10.com ;
    Skype: EuroX10.com

    Roller shutter 3

    From €49.99 incl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.

    Flood Sensor Z-Wave Plus

    €59.99 incl tax

    The Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop and has a wide variety of additional functions. Thanks to its flexible gold telescopic probes the device can even work on uneven surfaces. The Flood Sensor has a built in alarm siren which will help you to react quickly in case of a flood, rapid temperature change or the attempt to tamper with it. Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode. In addition to this a tilt sensor will detect tilt and movement over 15 degrees and send out a report to the main controller. The built in temperature sensor can not only be used to serve as a fire alarm sensor, it may also be used to manage an in-floor heating system.

    The Input terminal allows you to connect an external probe and install the sensor in any location. The Output terminal allows for a connection to an alarm system.

    The Sensor will work on 12 or 24 VDC or battery.