Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Risco - Electronics line

    Wireless Vibration Detector

    €55.55 excl tax
    The Wireless Vibration Detector senses low-amplitude vibrations around vulnerable access points, setting off an alarm before an intruder has a chance to enter the premises. Sensitivity is adjusted to the local background noise during installation.

    This detector provides an added value in that it sounds off during the first stage of a break-in attempt, before any damage can be done.
    SKU: EL2607

    <ul>
    <li>Model: EL2607</li>
    <li>Power: 3.6V ½ AA Lithium Battery</li>
    <li>Current Consumption:    25mA (transmission), 10µA (standby)</li>
    <li>Antenna: Built-in Internal Whip</li>
    <li>Transmitter Frequency: 868 or 433MHz FM</li>
    <li>Transmissions: Alarm, Low Battery, Supervision</li>
    <li>Alarm Delay During Normal Operation: Approximately 4 minutes</li>
    <li>RFI Immunity:    40V/m</li>
    <li>Operating Temperature: 0 - 60ºC</li>
    <li>Dimensions: L-65mm x W-30mm x H-16mm</li>
    </ul>

    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    <ul>
    <li>Model: EL2607</li>
    <li>Power: 3.6V ½ AA Lithium Battery</li>
    <li>Current Consumption:    25mA (transmission), 10µA (standby)</li>
    <li>Antenna: Built-in Internal Whip</li>
    <li>Transmitter Frequency: 868 or 433MHz FM</li>
    <li>Transmissions: Alarm, Low Battery, Supervision</li>
    <li>Alarm Delay During Normal Operation: Approximately 4 minutes</li>
    <li>RFI Immunity:    40V/m</li>
    <li>Operating Temperature: 0 - 60ºC</li>
    <li>Dimensions: L-65mm x W-30mm x H-16mm</li>
    </ul>

    Customers who bought this item also bought

    Dimmer Bypass 2

    €9.75 excl tax

    Bypass Fibaro is a device complementary to Fibaro Dimmer FGD212. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.

    Dimmer 2 - 250W Universal Insert Module

    From €40.64 excl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

    Aeotec Door/Window Sensor 7

    €36.57 excl tax
    The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.

    Compact Aluminum Magnetic Contact

    €11.38 excl tax
    Large magnetic power GAP up to 40mm Recommended for special applications (large doors)

    Z -Wave PLUS Clamp Power Meter - 3 clamps 60A

    €106.55 excl tax
    The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone. Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house.
    The main body is anchored using a back mount. The device has three clamps and reports W, kWH, V and A (up to 60 Ampere).