Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Wireless Temperature Detector

    €63.65 incl tax
    The MCT-560 is a fully supervised wireless PowerCode detector used with the PowerMax Pro (Ver. 5). The detector alerts the alarm system control panel upon detecting critical indoor or outdoor temperatures. The detector generates an alarm message when its sensor detects that the temperature has reached a certain temperature point. A restore message is generated when it crosses back the threshold temperature point. There are a total of four fixed temperature points and the user can enable one or more temperature point.
    The MCT-560 can be used in instances where temperature detection is critical. Other examples of detector usage are as follows:
    • Activating and deactivating pipe heaters at locations where low temperatures may causes the water in pipes to freeze.
    • Warn of possible electrical device malfunction due to high or low temperature levels.
    • Alerting elderly people of a significant rise or drop in room temperature.
    The MCT-560 detects both indoor and outdoor temperatures. The detector monitors room temperature using an internal sensor. For outdoor or refrigerator installations, a waterproof temperature probe (optional) is used.
    When the probe is connected, the temperature measurement is performed only by the probe sensor. When the probe is not connected, the temperature measurement is performed only by the detector's internal sensor.
    Once the predefined temperature is reached, the detector wirelessly updates the alarm system control panel which then sends a notification to the central station or uses the PGM/X-10 controls to switch on a connected appliance, for example, a heater or air conditioner.
    SKU: MCT-560
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Features:
    • The MCT-560 is compatible with supporting versions of PowerMax Pro
    • Internal sensor
    • An external temperature probe (cat. no. 99-300890) enables outdoor and refrigerator temperature sensing
    • Four selectable temperatures
    • Fully supervised PowerCode detector
    • Front and back tamper
    • Long battery life
    • Low battery supervision
    • Probe disconnected supervision
    • Alert transmission indication using an LED


    TechInfo:
    • Frequency (MHz): 868.95;
    • Communication Protocol: PowerCode;
    • Detector's ID Code: 24-bit digital word, over 16 million combinations,pulse width modulation;
    • Temperature Alarm or Tamper Message Repetition: Repetitive transmission (once every 15 minutes) until the alarm is restored;
    • Supervision: 15 min. intervals;
    • RFI protection: >20 V/m 80 to 2000 MHz;
    • Temperature measurement accuracy (internal sensor or optional probe): ±1.5°C ;
    • Probe cable length: 3.5m;
    • Power Source: 3V Lithium CR-2 type battery;
    • Transmission LED: Lights for 2 sec when reports alarm, alarm restore or tamper events;
    • Battery Life Expectancy: From 8-10 years(depends on the supervision signaling interval);
    • Battery Supervision: Automatic transmission of battery condition data as part of any status report;
    • Operating Temperature (indoor): -20°C to 50°C;
    • Probe Operating Temperature (outdoor): -30°C to 70°C;
    • Storage Temperature (indoor): -20°C to 60°C;
    • Dimensions: 92 x 36.5 x 31 mm;
    • Weight (excluding battery): 50 g;
    • Compliance with Standards: CFR47 (FCC) part 15, ICES-003:04,EN300220, EN301489, EN60950;








    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *
    Features:
    • The MCT-560 is compatible with supporting versions of PowerMax Pro
    • Internal sensor
    • An external temperature probe (cat. no. 99-300890) enables outdoor and refrigerator temperature sensing
    • Four selectable temperatures
    • Fully supervised PowerCode detector
    • Front and back tamper
    • Long battery life
    • Low battery supervision
    • Probe disconnected supervision
    • Alert transmission indication using an LED


    TechInfo:
    • Frequency (MHz): 868.95;
    • Communication Protocol: PowerCode;
    • Detector's ID Code: 24-bit digital word, over 16 million combinations,pulse width modulation;
    • Temperature Alarm or Tamper Message Repetition: Repetitive transmission (once every 15 minutes) until the alarm is restored;
    • Supervision: 15 min. intervals;
    • RFI protection: >20 V/m 80 to 2000 MHz;
    • Temperature measurement accuracy (internal sensor or optional probe): ±1.5°C ;
    • Probe cable length: 3.5m;
    • Power Source: 3V Lithium CR-2 type battery;
    • Transmission LED: Lights for 2 sec when reports alarm, alarm restore or tamper events;
    • Battery Life Expectancy: From 8-10 years(depends on the supervision signaling interval);
    • Battery Supervision: Automatic transmission of battery condition data as part of any status report;
    • Operating Temperature (indoor): -20°C to 50°C;
    • Probe Operating Temperature (outdoor): -30°C to 70°C;
    • Storage Temperature (indoor): -20°C to 60°C;
    • Dimensions: 92 x 36.5 x 31 mm;
    • Weight (excluding battery): 50 g;
    • Compliance with Standards: CFR47 (FCC) part 15, ICES-003:04,EN300220, EN301489, EN60950;