Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    Fibaro Double Smart Module

    €48.77 excl tax
    The remotely operated FIBARO Double Smart Module is designed to turn electrical devices or circuits on and off.
    The Double Smart Module (FGS-224) allows to control two devices or circuits.
    The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.
    SKU: ZWFIB FGS-224
    Availability: In stock

    Features

    • Works with various types of switches and buttons.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

    The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

    Specifications

    Power supply

    100-240V~ 50/60Hz or 24-30V DC

    Rated load current

    Double Smart Module (FGS-224):
    6A per one channel
    9.5A total

    Compatible load types

    resistive or incandescent only

    Active element

    micro-gap relay μ

    Maximum length of wires

    3 meters

    Recommended wire cross-section area

    0.2–2.0mm2 (24–14 AWG)
    (depending on load current)

    Operating temperature

    0–35°C

    Ambient humidity

    0–95% RH without condensation

    Radio protocol

    Z-Wave (500 series chip)

    Radio frequency band

    868.0–868.6MHz; 869.7–870.0MHz

    Max. transmitting power

    +5dBm

    Range

    up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure

    Dimensions
    (Height x Width x Depth)

    42.5 x 38.25 x 20.3 mm

    Classification of installation and use

    Automatic electrical control for use in equipment for household or similar use

    Mode of operation

    Type 1.C Action

    Pollution degree

    2

    Software class

    Class A

    Protection against electric shock class

    Class 0

    Compliance with EU directives

    2011/65/EU
    2015/863
    2014/53/EU

    manuals:

    Operating manual – English

    Short manual – Multilanguage

    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

    Features

    • Works with various types of switches and buttons.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

    The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

    Specifications

    Power supply

    100-240V~ 50/60Hz or 24-30V DC

    Rated load current

    Double Smart Module (FGS-224):
    6A per one channel
    9.5A total

    Compatible load types

    resistive or incandescent only

    Active element

    micro-gap relay μ

    Maximum length of wires

    3 meters

    Recommended wire cross-section area

    0.2–2.0mm2 (24–14 AWG)
    (depending on load current)

    Operating temperature

    0–35°C

    Ambient humidity

    0–95% RH without condensation

    Radio protocol

    Z-Wave (500 series chip)

    Radio frequency band

    868.0–868.6MHz; 869.7–870.0MHz

    Max. transmitting power

    +5dBm

    Range

    up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure

    Dimensions
    (Height x Width x Depth)

    42.5 x 38.25 x 20.3 mm

    Classification of installation and use

    Automatic electrical control for use in equipment for household or similar use

    Mode of operation

    Type 1.C Action

    Pollution degree

    2

    Software class

    Class A

    Protection against electric shock class

    Class 0

    Compliance with EU directives

    2011/65/EU
    2015/863
    2014/53/EU

    manuals:

    Operating manual – English

    Short manual – Multilanguage

    Customers who bought this item also bought

    Relay Insert 2 * 1.5 KW Z-Wave Plus

    €48.77 excl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Roller shutter 3

    €48.77 excl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.

    Flush On/Off Thermostat 2

    €55.20 excl tax
    The Qubino On/Off Thermostat 2 is your wireless heating and hot water controller that also measures the power consumption. This amazingly tiny module is ideal for wireless control of electric or water-based underfloor heating systems, electric water heaters, hot water pumps, and electric radiators.

    Extensor Z-Wave-IR

    €65.03 excl tax
    Z-Wave to IR extender for air-conditioning (AC) devices. It works with any Z-Wave compliant gateway or controller by translating Z-Wave thermostat Commands to AC IR control code. IR Extender also comes with built-in temperature sensor which allows gateway or controller to get the current room temperature.

    Flush 1 Relay Potencial Free

    €48.70 excl tax

    This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

    With this module can feed your load with the desired voltage because it has a separate entrance for this purpose.
    item also available in:
    908.4 MHz - USA/Canada, México, Chile
    921,40 MHz - Australia, Brazil, New Zealand
    Contact for details on minimal quantities and deadlines for these frequencies