Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    RGBW Controller 2

    €59.99 incl tax
    FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

    FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.

    Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
    SKU: ZWFIB FGRGBW-442
    Availability: In stock

     

    • Compatible with any certified Z-Wave or Z-Wave Plus controller.
    • Allows for controlling:
      • RGB/RGBW LED strip,
      • one-color LED strips,
      • halogen lights,
      • other compliant resistive loads.
    • Allows for connecting to inputs:
      • switches/buttons,
      • 0-10V analog sensors or potentiometers.
    • Active power and energy metering.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
    Power supply: 12/24V DC ±10%
    Rated load current: 6A for channel,
    12A total for all outputs
    Power output: 144W combined for 12V
    288W combined for 24V
    Inputs: 4 inputs, 0-10V (configurable pull-up) or binary
    Outputs: 4 outputs, PWM
    PWM frequency: 244Hz
    Maximum length of wires: 2m
    Operating temperature: 0–40°C (32–104°F)
    Storage temperature: -40–60°C (-40–140°F)
    Radio protocol: Z-Wave (500 series chip)
    Radio frequency: 868.4 / 869.85 MHz EU;
    908.4 / 916 MHz US;
    919.8 / 921.4 MHz ANZ;
    869.0 MHz RU;
    Transmit power: EIRP max. +2dBm
    Range: up to 50m (164 ft) outdoors
    up to 40m (131 ft) indoors
    (depending on terrain and building structure)
    Recommended wire cross-section area 0.2–2.0mm2 (24–14 AWG)
    (depending on load current)
    Dimensions (Length x Width x Height): 42.35 x 36.90 x 17.5 mm
    (1.67” x 1.5” x 0.69”)
    Compliance with EU directives RoHS 2011/65/EU
    RED 2014/53/EU

     






    Products specifications
    Technology Z-Wave
    Function Dimmer and RGBW
    Product type In wall
    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent

     

    • Compatible with any certified Z-Wave or Z-Wave Plus controller.
    • Allows for controlling:
      • RGB/RGBW LED strip,
      • one-color LED strips,
      • halogen lights,
      • other compliant resistive loads.
    • Allows for connecting to inputs:
      • switches/buttons,
      • 0-10V analog sensors or potentiometers.
    • Active power and energy metering.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
    Power supply: 12/24V DC ±10%
    Rated load current: 6A for channel,
    12A total for all outputs
    Power output: 144W combined for 12V
    288W combined for 24V
    Inputs: 4 inputs, 0-10V (configurable pull-up) or binary
    Outputs: 4 outputs, PWM
    PWM frequency: 244Hz
    Maximum length of wires: 2m
    Operating temperature: 0–40°C (32–104°F)
    Storage temperature: -40–60°C (-40–140°F)
    Radio protocol: Z-Wave (500 series chip)
    Radio frequency: 868.4 / 869.85 MHz EU;
    908.4 / 916 MHz US;
    919.8 / 921.4 MHz ANZ;
    869.0 MHz RU;
    Transmit power: EIRP max. +2dBm
    Range: up to 50m (164 ft) outdoors
    up to 40m (131 ft) indoors
    (depending on terrain and building structure)
    Recommended wire cross-section area 0.2–2.0mm2 (24–14 AWG)
    (depending on load current)
    Dimensions (Length x Width x Height): 42.35 x 36.90 x 17.5 mm
    (1.67” x 1.5” x 0.69”)
    Compliance with EU directives RoHS 2011/65/EU
    RED 2014/53/EU

     






    Products specifications
    Technology Z-Wave
    Function Dimmer and RGBW
    Product type In wall
    Customers who bought this item also bought

    Relay Insert 2 * 1.5 KW Z-Wave Plus

    €59.99 incl tax
    FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    Dimmer 2 - 250W Universal Insert Module

    €59.99 incl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

    Roller shutter 3

    €59.99 incl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.

    Dimmer Bypass 2

    €11.99 incl tax

    Bypass Fibaro is a device complementary to Fibaro Dimmer FGD212. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.

    Walli Roller Shutter

    €76.46 incl tax €89.95 incl tax
    Intelligent roller blinds controller that allows you to manage the gate, roller blinds, blinds and scenes with a single click.