Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Heatit

    Heatit full range of smart home products available on eurox10

    View as Grid List
    Sort by
    Display per page

    Cable for Heat-it Thermostat Software-Updates

    €70.72 incl tax
    With the optional usable cable you can update Heat-it thermostats' software and firmware.

    Floor Sensor Ø4MM for Heatit Thermostat

    €24.99 incl tax
    The Floor Sensor is ideal suited to measure soil temperature – especially when using a floor heating – and reporting to the Heat-it thermostat. Therefor the sensor can be laid in empty conduits and set into the ground.

    NTC 10 kOhm @ 25°C
    Cable length: 3 meters

    Z-Wave Wall Thermostat

    €146.37 incl tax
    This equipment is an electronic wall thermostat for flush mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with your Home Automation systems. The thermostat is equipped with a single-pole switch an can handle loads up to 16A/3600W at 230V. The Device can be used with two external temperature sensors and shows the ambient temperature, either in the room or floor. The sensitive cap sense buttons can be used to set new values by lightly pressing.

    Z-Wave Plus integrated.



    art. 54 304 99

    Heatit Z-DIN 616 - 6 relay module

    €221.40 incl tax
    Heatit Z-DIN 616 is a 6 x 16A potential free relays for DIN rail mounting. The module is equipped with 6 relay switches and 6 digital inputs for mounting on a standard M36 DIN rail (EN50022).

    The 6 independent relay switches of the Heatit Z-DIN 616 can be freely controlled from the Z-Wave network and be used for many different purposes. All 6 relay switches are galvanically isolated from each other and may be used for controlling AC and/or DC loads. Each relay switch is rated for loads of up to a maximum of 16A.

    The 6 digital inputs can be connected to dry contacts, e.g. limit switches, door/window contacts, or push-buttons. Another option is to connect them to open-collector outputs from discrete sensors, e.g. PIR sensors. The 6 inputs of the Heatit Z-DIN 616 may also function as a scene controller and activate predefined scenes in other Z-Wave devices or controllers (by transmitting Central Scene notifications).

    The Heatit Z-DIN 616 is powered by a 10 – 24Vdc power supply. Initiation of Z-Wave inclusion and exclusion is executed by activating a push-button through a little hole in the front of the module. The Heatit Z-DIN 616 is equipped with a LED in the front of the module for different kinds of status indications.

    HEATIT Z-RELAY

    €116.85 incl tax
    Heatit Z-Relay multipurpose relay module can be used for many different applications. The IP 55 rated casing makes it useful for any outdoor application. Can pull loads up to 16A and 25A. The relay has three inputs: analog or digital. You can use both analog and digital inputs, or a combination.

    Heatit Z-Relay is a multipurpose product and can be used for the following applications:
    • Boiler control
    • Leakage control
    • Temperature control
    • Outdoor applications
    The relay has 3 analog/digital inputs and can be used with a lot of different sensors and meters, from water meter pulse sensors to NTC temperature sensors.
    The relay comes in two different versions, 16A and 25A. They both have firmware updates (OTA), power metering and S2 security.
    We are able to make special firmware if a customer has a special requirement.

    HEATIT Z-Water

    €258.30 incl tax
    Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. The module clips right onto a DIN-rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/digital inputs. The module is power supplied from a 230V AC mains connection and is able to deliver an output supply of 24V DC or 230V.

    Heatit Z-Water relay outputs may be freely controlled from the Z-Wave network, and may be used for several purposes, e.g. on/ off control of lights, controlling valve actuators in an underfloor heating system, or controlling other home automation systems.

    Heatit Z-Water analog/digital inputs (different firmware versions) may be configured to work with different functionalities. They may be connected to potential free contacts, opencollector outputs, and may also control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs may be used as scene controllers and send central scene notifications to the Z-Wave primary controller (via digital inputs only).